Keep your batteries charged safely and efficiently with the Eco-Worthy 12V Smart LiFePO4 Battery Charger. Available in both 5A and 10A charging options, this intelligent charger is specifically designed for 12V lithium iron phosphate (LiFePO4) batteries, ensuring optimal charging performance and extended battery lifespan.

Battery Charger with LCD Display
Technical Specifications
12V 5A Smart LiFePO4 Lithium Battery Charger
12V 10A Smart LiFePO4 Lithium Battery Charger
AC Input:
Auto-switching 220V AC, 50Hz
Overcharge Protection:
Yes
Reverse Polarity Protection:
Yes
Short Circuit Protection:
Yes
Spark Proof:
Yes
Operating temperature:
14℉ - 104℉(-10℃ - 40℃)
Recommender Battery:
12~200Ah Lead-Acid battery/9-108Ah LiFePO4 battery
AC Input:
Auto-switching 220V AC, 50Hz
Overcharge Protection:
Yes
Reverse Polarity Protection:
Yes
Short Circuit Protection:
Yes
Spark Proof:
Yes
Operating temperature:
14℉ - 104℉(-10℃ - 40℃)
Recommender Battery:
12~300Ah Lead-Acid battery/9-108Ah LiFePO4 battery
Included in the Box
User manual
Eco-Worthy 5A & 10A 12V Smart Battery Charger with LCD Display - User Manual
DownloadFrequently Asked Questions
How do you test lithium battery performance?
+
When measuring the battery's rated voltage, it is recommended to first disconnect the connection wires between the battery and the load, inverter, and charger to ensure accurate results.
What’s the relationship between lithium battery voltage and SOC?
+
①During battery use, it is recommended to keep the SOC at 20%~80% to extend the battery life (charge to at least 13.3V) ②If the battery is not used for a long time (more than half a year), at least 50% of the power should be guaranteed, otherwise the battery may be over-discharged and damaged. ③After fully charged, if the battery voltage is greater than or equal to 13.3V after one hour without any connections, it is within the normal range. ④This table is only the test result under ideal conditions. After adjusting to the correct parameters, the voltage drops to 13.26V, which does not prove that the battery capacity is insufficient. The actual capacity needs to test the power of the connected load and the length of use.
How to activate a protected lithium battery?
+
A:Take 12.8V battery as an example, when the voltage drops to 0~2V, the battery BMS may enter protection state, and the battery needs to be reactivated. Method 1: Use an AC-DC LiFePO4 Lithium charger with activation function, set the charging voltage to 14.6V for charging. After 30~60 minutes, use a multimeter to measure the voltage. If the voltage changes, continue to charge. Method 2: Use a solar panel and controller with activation function. In an environment with good lighting conditions, connect the solar panel, controller, and battery, and set the charging voltage to 14.6V for charging. After 30~60 minutes, remove the battery connection wire, use a multimeter to measure the voltage. If the voltage changes, continue to charge.
Solar Panel Performance Testing Method
+
Disconnect all wires from the solar panel. Use a multimeter to measure both short-circuit current (Isc) and open-circuit voltage (Voc) under sunny outdoor conditions.Note: Performance may vary due to controller temperature and battery charge level.
What kind of warranty and support do you offer?
+
We provide up to a 10-year warranty on key battery models, along with U.S.-based support. Our team assists with installation guidance, troubleshooting, and system planning to ensure a smooth experience.







